MAX 5 MIN 64 OZ. – GLUE EPOXY ADHESIVE FAST SET TIME TOUGHENED LOW COST BULK KIT

$55.72

MAX 5MIN A/B is a two part toughened epoxy/polymercaptan resin system that provides fast set up time suitable for bonding, general assembly and construction. It is a improved performance equivalent to the common 5 minute epoxy resins that is typically supplied in dual-syringe packaging but formulated to provide higher tensile shear and peel strength.

This offering is presented at a much lower bulk pricing than the common prepackage kits typically offered in commercial hardware stores. MAX 5MIN A/B offers higher peel strength than the conventional 5- minute systems which makes it suitable for a wider selection of bondable substrates.

64 OZ. COMBINED VOLUME
32 Oz. PART A
32 Oz. PART B

1:1 EASY TO USE (BY WEIGHT OR BY VOLUME) MIX RATIO

Available Kit Sizes:
32 oz.
1 Gallon
2 Gallon

Description

MAX 5MIN A/B can be used for bonding composites, metals, concrete, glass, wood and almost all types of substrates. It offers ease-of- use, fast set-up time and adequate bond strength for light to medium duty adhesive applications.

It can also be used as a fast setting impregnating resin for fiberglass, Kevlar and carbon fiber reinforcing and field repairs or as fast casting resin of small to medium parts for rapid prototyping. MAX 5MIN A/B can also be used for waterproofing of porous or absorbent substrates such as wood, textiles masonry and stone substrates.

MAX 5MIN A/B can be used as an adhesive to bond to plastic substrates such Acrylonitrile Butadiene Styrene (ABS) Polypropylene (PP), High and Low Density Polyethylene (HDPE and LDPE) and Polyethylene Terephthalate ( PET) with proper surface pre-treatment before any significant adhesion develops due to the inherent low surface tension or substrates that demonstrates poor wettability.

Corona treating or Flame Treating the plastic as demonstrated in link below enables MAX 5MIN A/B adequate surface bonding of plastic substrates.

Useful Links:
MAX 5 MIN A/B Properties
Basic Epoxy Mixing Instructions
Surface Preparation of Substrates for Bonding or Coating
Flame Treatment of Plastic Substrates for Adhesive Bonding
General Bonding Design and Guideline
MAX 5MIN A/B Fast Setting Adhesive System Demo
Resin Coverage and Yield Per Gallon Table
Cold Weather Notice

Additional information

Weight6 lbs
Dimensions4 × 8 × 10 in

Reviews

There are no reviews yet.

Be the first to review “MAX 5 MIN 64 OZ. – GLUE EPOXY ADHESIVE FAST SET TIME TOUGHENED LOW COST BULK KIT”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…