MAX GFE is a two-component epoxy based resin that exhibits very high tensile strength properties. It is filled with milled fiberglass and the vacuum processed to remove any entrapped or incorporated air bubbles. The fiberglass filler dramatically improves the tensile strength, flexural modulus, thermally conductivity, abrasion resistance and surface hardness compared to an unfilled system. MAX GFE is easily mixed and poured into place. It is self-leveling and has low thixotropic gel-like consistency. Due to its thermally conductive filler a 400 gram mass can be mixed and casted without excessive heat due to exothermic heat generation.
MAX GFE is suitable for casting parts that require high tensile strength, dimensional stability and hardness.
MAX GFE can also be utilized as a potting compound that requires higher electrical insulative properties than standard potting compounds. It is suitable for use with silicone, polyurethane, steel, and wood molds. MAX GFE can be demolded after 36 hours room temperature cure or for a faster de-mold times, post cured under heat (30 minutes at 200oF) after it has gelled for 4 hours at room temperature allow to cool and de-mold.