MAX GPE CLEAR 1.5 GAL – EPOXY FIBERGLASSING IMPREGNATING PARTS CASTING CLEAR

$92.72

MAX GPE A/B MEDIUM SET is a two-component epoxy based resin system designed to provide a broad range of mechanical and physical properties that is suitable for almost all types of epoxy resin applications. It can be utilized as a structural adhesive demonstrating excellent adhesion to wide selection of substrates, chemical resistant or protective coating, impregnating and laminating for composite applications, potting applications for electronics and as a casting resin for large and small applications.

Low cost Epoxy Resin with Balance.

MAX GPE is used by many of our customers for:
Protective Water-Proofing Coating
Clear High Glass Finish
Casting Resin
Potting Compount
Adhesive for General Bonding
Bonds to Wood, Metals and Concrete Materials
Resin for General Fiberglassing Applications

1 1/2 GALLON (192 OZ.) COMBINED VOLUME
1 GALLON PART A
1/2 GALLON PART B

2:1 EASY TO USE (BY WEIGHT OR BY VOLUME) MIX RATIO

Other Kit Sizes Available:
24oz
48oz
96oz

Description

MAX GPE A/B MEDIUM SET is mixed two parts Resin to one part Curing Agent by weight or by volume (2:1). The mixed consistency is very low in viscosity, clear and easily poured or applied in to place resulting in bubble free castings. MAX GPE A/B MEDIUM SET has a 60 minutes gel time that allows adequate working time for casting, coating, bonding and potting or encapsulating applications.

MAX GPE A/B MEDIUM SET performs well as an adhesive for metals, alloys, plastic, wood, stones products, fiberglass, carbon fiber composites and concrete and other substrates that require high tensile shear strength properties. Higher adhesion performance can be achieved after a post cure cycle of 1 hour at 120oC.

MAX GPE A/B MEDIUM SET coating properties exhibits very high gloss, good color stability, high surface and excellent chemical resistance.

Optimized amounts UV inhibitors, anti-oxidants and stabilizers are incorporated with the MAX GPE A/B MEDIUM SET to provide added outdoor durability.

An aliphatic polyurethane coating should be applied to further improved resistance to UV degradation.

MAX GPE A/B MEDIUM SET can be used as a protective or decorative coating for metals, alloys, plastic, wood, stones products, fiberglass, carbon fiber composites and concrete and other substrates

Higher coating performance can be achieved after a post cure cycle of 1 hour at 120oC.

MAX GPE A/B MEDIUM SET is an excellent choice for composite fabrication using fiberglass, carbon fiber, Aramid, and other hybrid fabrics. Its low viscosity allows fast fabric wet-out resulting in minimal void and laminant porosity. Cured composites fabricated with

MAX GPE A/B MEDIUM SET exhibits exceptional mechanical properties such as impact resistance, compressive and tensile strength. Higher mechanical performance can be achieved after a post cure cycle of 1 hour at 120oC.

As a casting resin and potting compound, MAX GPE A/B MEDIUM SET demonstrates good dimensional stability excellent electrical insulative performance and low coefficient of expansion and contraction.

Safe to use on Polystrene Foam

General mechanical properties are enhanced after a post cure cycle of 1 hour at 120oC.

Useful Links:
MAX GPE A/B Properties
Basic Epoxy Mixing Instructions
Composite Fabricating Basics
Coverage and Yield per Gallon Guide
Cold Weather Notice

Additional information

Weight16 lbs
Dimensions6 x 12 x 12 in
Storing

MAX GPE A/B MEDIUM SET should be stored in a cool dry place. DO NOT store above 30ºC for prolonged period. MAX GPE A/B MEDIUM SET has a 12-month shelf from the date of shipment when stored properly. Replace the caps tightly to prevent moisture contamination. When properly stored this kit can last 2 or more years.

Reviews

There are no reviews yet.

Be the first to review “MAX GPE CLEAR 1.5 GAL – EPOXY FIBERGLASSING IMPREGNATING PARTS CASTING CLEAR”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…