EPOXY RESIN WHITE COATING GEL COAT REPAIR
Epoxy Resin White Coating Gel Coat Repair – MAX GPE WHITE A/B is mixed two parts Resin to one part Curing Agent by weight or by volume (2:1). The mixed consistency is very low in viscosity, clear and easily poured or applied in to place resulting in bubble free castings. MAX GPE WHITE A/B has a 60 minutes gel time that allows adequate working time for casting, coating, bonding and potting or encapsulating applications.
MAX GPE WHITE A/B performs well as an adhesive for metals, alloys, plastic, wood, stones products, fiberglass, carbon fiber composites and concrete and other substrates that require high tensile shear strength properties. Higher adhesion performance can be achieved after a post cure cycle of 1 hour at 120oC.
MAX GPE WHITE A/B coating properties exhibits very high gloss, good color stability, high surface and excellent chemical resistance.
Optimized amounts UV inhibitors, anti-oxidants and stabilizers are incorporated with the MAX GPE WHITE A/B to provide added outdoor durability.
An aliphatic polyurethane coating should be applied to further improved resistance to UV degradation.
MAX GPE WHITE A/B can be used as a protective or decorative coating for metals, alloys, plastic, wood, stones products, fiberglass, carbon fiber composites and concrete and other substrates
Higher coating performance can be achieved after a post cure cycle of 1 hour at 120oC.
MAX GPE WHITE A/B is an excellent choice for composite fabrication using fiberglass, carbon fiber, Aramid, and other hybrid fabrics. Its low viscosity allows fast fabric wet-out resulting in minimal void and laminant porosity. Cured composites fabricated with
MAX GPE WHITE A/B exhibits exceptional mechanical properties such as impact resistance, compressive and tensile strength. Higher mechanical performance can be achieved after a post cure cycle of 1 hour at 120oC.
As a casting resin and potting compound, MAX GPE WHITE A/B demonstrates good dimensional stability excellent electrical insulative performance and low coefficient of expansion and contraction.
Safe to use on Polystrene Foam
General mechanical properties are enhanced after a post cure cycle of 1 hour at 120oC.
MAX GPE A/B Properties
Basic Epoxy Mixing Instructions
Gel Coat Repair
Pre-Mix and Mixing Notes
MAX GPE Application Techniques
Customer Cabin Cruiser Boat Reconstruction Video
Cold Weather Notice
There are no reviews yet.