MAX TCR 64 OZ. – ACRYLIC WATER EPOXY CLEAR FOR FLORAL ARRANGING & WATER SIMULATION

$36.21

Thick Casting Resin
MAX TCR A/B is very clear and low viscosity resin system that offers a very long working time. It is very flexible and resilient upon cure offering excellent adhesion to containers or vases made from glass, ceramic, clay, stone pottery and other materials commonly used in silk floral and artificial plants arrangements.

Its mix ratio is equal parts by volume or weight allowing ease of use.
The long working time provides de-airing of mixed or entrapped air bubbles during mixing and casting. It can be mixed in a large mass of up to 2000 grams without generating high exothermic heat. The peak exothermic temperature of a 2000 gram mass (about ½ gallon of volume) achieved a maximum heat of 135ºF
All polymers has a physical property known as CTE (Coefficient of Expansion and Contraction), which its dimensional expansion and contraction based on the temperature it is exposed to. If the CTE of the polymer is lower than the structural strength of the glass, such as thin walled glass vases, breakage will occur when it is exposed to sudden or repeat ambient temperature changes.

A tack free cure is achieved in 48 hours of room temperature cure.
Upon cure MAX TCR A/B is very flexible eliminating breakage of the glass vase typically caused by the differential Coefficient of Expansion and Contraction of the cured polymers.
By insuring that the CTE value or rate of expansion and contraction is higher (flexible) value than glass, internal stresses that can shatter the glass container can be averted.

64 oz. COMBINED VOLUME
32 oz. PART A
32 oz. PART B

1:1 EASY TO USE (BY WEIGHT OR BY VOLUME) MIX RATIO

Description

MAX TCR A/B a 2-component epoxy based resin system specially formulated for casting thick sections of clear epoxy resins. It is specially formulated to provide a very long cure time and very flexible or low hardness. MAX TCR A/B is commonly used in the silk and artificial floral arrangement industry called ACRYLIC WATER.

MAX TCR A/B offers water clarity, low viscosity and a very long working time thus allowing the user ample time for floral arrangement. Upon cure MAX TCR A/B demonstrates a permanent bond to the artificial arrangements, vase or decorative container and other embellishments typically used silk floral arrangements.

Its engineering design is to simulate the appearance of water in an artificial floral arrangement.

Our company is the original manufacturer and supplier to the distributor that sold to the national chain store, WALMART, which was marketed as “ACRYLIC WATER”.

Polymer Composites, Inc. is proud to include this well-known product in our list of specially formulated products epoxy-formulated systems.

  • 1:1 mix ratio and low viscosity formulation
  • Provides water clarity
  • Long working time
  • Low odor, low toxicity resin system
  • Low exothermic heat generation during large mass casting
  • Self-leveling
  • Cures to a bubble free casting
  • Bonds to glass vases, plastic & artificial floral arrangements
  • Allows expansion and contraction of the casting preventing glass vase breakage

Useful Links:
Basic Epoxy Mixing Instructions
Shore Durometer Hardness
Flower Projects
General Mixing Procedure
Cold Weather Notice

Additional information

Weight6 lbs
Dimensions4 x 6 x 9 in

Reviews

There are no reviews yet.

Be the first to review “MAX TCR 64 OZ. – ACRYLIC WATER EPOXY CLEAR FOR FLORAL ARRANGING & WATER SIMULATION”

This site uses Akismet to reduce spam. Learn how your comment data is processed.